SS-301 / 302 Full Hard sheets UTS (Mpa)1450 - 1550 HRC 46 - 48 SUS301 Stainless Steel Sheet

AISI 301 Stainless Steel (UNS S30100)

AISI 301 stainless steel (UNS S30100) is the most susceptible to cold deformation strengthening among conventional austenitic stainless steels. Its work hardening rate is extremely high, with each increase in the amount of cold work, the tensile strength and yield strength will increase significantly. The response to work hardening is particularly important for structural parts, including angle steel and channel sections, which are expected to have additional strength and stiffness after manufacture. On the other hand, for deep drawing applications, lower work hardening rates are generally preferred and can be obtained in austenitic alloys with higher nickel content (especially types 304, 304L, and 305).

Type 301 SS has good corrosion resistance under atmospheric conditions, but it has poor corrosion resistance in reducing media, and chemical media such as acids, alkalis and salts, so it is not recommended for harsh corrosion environments. 301 steel is mainly used in the cold working state to withstand higher loads, but also hopes to reduce the weight of equipment and corrosion-resistant parts.

Datasheet & Specification

The following tables and lists give the stainless steel 301 datasheet and specification including chemical composition, physical properties and mechanical properties, heat treatment, welding, etc.

Chemical Composition

SS 301 material chemical composition is listed in the following table.

Datasheet 1, The table below shows AISI 301 stainless steel composition.

Notes:

• ASTM 666: Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
• ASTM A240/A240M: Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
• ASTM A959: Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
• SAE AMS 5517: Steel, Corrosion Resistant, Sheet and Strip
• SAE J405: Chemical Composition of SAE Wrought Stainless Steels

AISI 301 Stainless Steel Properties

The datasheets below list grade 301 stainless steel properties including physical properties and mechanical properties.

Physical Properties

SS 301 physical properties are listed in the table below such as density, melting point, specific heat, electrical resistivity, elastic modulus (modulus of elasticity), thermal conductivity, and coefficient of thermal expansion (CTE).

FAQ:
1. Where is your factory ?
Our company's processing center is located in Wuxi City , China.
Which is well equipped with kinds of machines, such as laser cutting machine,mirror polishing machine and so on.We can provide a wide range of personalized services according to the customers' needs.

2. What are your company's main products ?
Our main products are stainless steel plate/sheet, coil, round/square pipe, bar, channel, etc.

3. How do you control quality ?
Mill Test Certification is supplied with shipment, Third Party Inspection is available.

4. What are the advantages of your company ?
We have many professionals, technical personnel, more competitive prices and best after-dales service than other stainless steel companies.

5. How many coutries you already exported ?
A5: Exported to more than 50 countries mainly from America, Russia, UK, Kuwait, Egypt, Iran, Turkey, Jordan,India, etc.

Company Overview ：

The company has an indoor warehouse of 5000 square meters and an open warehouse of 4000 square meters, which can fully meet the temporary turnover and phased storage of customers' steel pipe reservation.

The subordinate processing plant has 6 sets of medium frequency heating fully automatic thermal expansion units, 5 sets of fully automatic groove processing machines, 1 set of processing and drying integrated painting equipment imported from Germany, 1 set of streamlined anti-corrosion processing equipment and 1 set of streamlined thermal insulation processing equipment; The steel pipe can be processed, cut, hot expanded or cold drawn according to the needs, so as to fully meet the customized needs of users.

Main products :

We can supply various kinds of metal material, like carbon steel seamless pipe, alloy tube, fertilizer tube, spiral tube, ductile iron pipe, cryogenic tube, special pipe for cold storage and galvanized Steel.
Our products can be used in various applications over a wide range of industries, like chemical, petrochemical, oil and gas, pharmaceutical, food processing, power generation, aviation, marine and so on.

Sales Performance and Network :

The annual sales volume of the company is more than 300000 tons, and the sales volume has reached new highs. The company has formed a complete sales service system based on East China and facing customers all over the country. The company has a good reputation, high-quality products, strong strength, low price reputation in the country, products are deeply dependent on users. The company's products not only sell well in the domestic market, but also sell well in the United States, Canada, Colombia, the United Arab Emirates, Thailand, India, Vietnam, Pakistan, South Korea, Japan, Russia and other countries and regions, and are well received by foreign customers. The number of export countries is growing, and the sales volume is gradually increasing.